Reply to thread

Message: [QUOTE="mrdude, post: 8688322, member: 32324"] I don't know why you just don't make a cable yourself - if you can solder, it's a dawdle: Scart pinout: [URL='https://www.google.com/search?q=scart+pinout&hl=en-GB&source=lnms&tbm=isch&sa=X&sqi=2&ved=0ahUKEwiPj-6wkKTcAhXILpQKHeSCBJgQ_AUICigB&biw=1366&bih=635#imgrc=BZlvVJDRL77UoM']scart pinout - Google Search[/URL]: You just need to use an old scart cable and put some composite cable plugs on. You'll need to use Red/Green/Blue and Audio outputs - and of course GND. Most people have old scart leads kicking about and a few old composite cables - you could make it in about 20 minutes!!! and not pay a penny. That cable you ordered is the wrong one - the red and white connectors are for the Audio signal and the yellow is composite - which means red/green/blue (the picture) all come down the same line, If you plug that into that port you showed on TV picture the colours will not work properly. That's why I told you to get the other cable and so did others. You need one where the R/G/B colours are separate so they can plug into your TV port properly, and also have the audio on - So you need a cable with scart and then 5 separate plugs coming from it. Red: Audio (Audio Right+gnd) White: Audio (Audio Left +gnd) Colours: [URL]https://obrazki.elektroda.pl/9559172600_1445928951.jpg[/URL] [/QUOTE]